summaryrefslogtreecommitdiff
path: root/templates
diff options
context:
space:
mode:
Diffstat (limited to 'templates')
-rw-r--r--templates/casper/parameters.txt49
-rw-r--r--templates/syslinux/boot.txt2
-rw-r--r--templates/syslinux/f1.txt.install25
-rw-r--r--templates/syslinux/f1.txt.live (renamed from templates/syslinux/f1.txt)6
-rw-r--r--templates/syslinux/f2.txt.install (renamed from templates/syslinux/f2.txt)18
-rw-r--r--templates/syslinux/f2.txt.live23
-rw-r--r--templates/syslinux/f3.txt.install (renamed from templates/syslinux/f3.txt)12
-rw-r--r--templates/syslinux/f3.txt.install.g-i23
-rw-r--r--templates/syslinux/f3.txt.live23
-rw-r--r--templates/syslinux/f4.txt.install23
-rw-r--r--templates/syslinux/f4.txt.install.g-i (renamed from templates/syslinux/f4.txt)20
-rw-r--r--templates/syslinux/f4.txt.live23
-rw-r--r--templates/syslinux/f5.txt2
-rw-r--r--templates/syslinux/f6.txt8
-rw-r--r--templates/syslinux/f7.txt4
-rw-r--r--templates/syslinux/f8.txt8
-rw-r--r--templates/syslinux/f9.txt.install (renamed from templates/syslinux/f9.txt)8
-rw-r--r--templates/syslinux/f9.txt.live23
-rw-r--r--templates/syslinux/syslinux.cfg16
19 files changed, 264 insertions, 52 deletions
diff --git a/templates/casper/parameters.txt b/templates/casper/parameters.txt
new file mode 100644
index 0000000..dcc04fc
--- /dev/null
+++ b/templates/casper/parameters.txt
@@ -0,0 +1,49 @@
+Boot Parameters for Debian Live
+-------------------------------
+
+Updated for casper 1.77+debian-7 on 2007-02-08.
+
+These options (can be combined) work from the syslinux bootprompt:
+
+casper casper-getty
+casper xdebconf
+casper hostname=HOSTNAME
+casper userfullname=USERFULLNAME
+casper username=USERNAME
+casper {keyb|kbd-chooser/method}=KEYBOARD
+casper {klayout|console-setup/layoutcode}=LAYOUT
+casper {kvariant|console-setup/variantcode}=VARIANT ,
+casper {kmodel|console-setup/modelcode}=CODE , koptions=OPTIONS
+casper ip=IFACE,ADDRESS,NETMASK,GATEWAY[:IFACE,ADDRESS,NETMASK,GATEWAY]*
+casper ip[=frommedia]
+casper {live-media|bootfrom}=DEVICE
+casper live-media-offset=BYTES
+casper locale=LOCALE | debian-installer/locale=LOCALE
+casper netboot[=nfs|cifs]
+casper persistent
+casper nopersistent
+casper showmounts
+casper todisk=DEVICE
+casper toram
+casper {preseed/file|file}=FILE
+casper package/question=VALUE
+
+Values for the vga kernel parameter:
+
+Colours 640x400 640x480 800x600 1024x768 1152x864 1280x1024 1600x1200
+--------+--------------------------------------------------------------
+ 4 bits | ? ? 0x302 ? ? ? ?
+ 8 bits | 0x300 0x301 0x303 0x305 0x161 0x307 0x31C
+15 bits | ? 0x310 0x313 0x316 0x162 0x319 0x31D
+16 bits | ? 0x311 0x314 0x317 0x163 0x31A 0x31E
+24 bits | ? 0x312 0x315 0x318 ? 0x31B 0x31F
+32 bits | ? ? ? ? 0x164 ?
+
+Colours 640x400 640x480 800x600 1024x768 1152x864 1280x1024 1600x1200
+--------+--------------------------------------------------------------
+ 4 bits | ? ? 770 ? ? ? ?
+ 8 bits | 768 769 771 773 353 775 796
+15 bits | ? 784 787 790 354 793 797
+16 bits | ? 758 788 791 355 794 798
+24 bits | ? 786 789 792 ? 795 799
+32 bits | ? ? ? ? 356 ?
diff --git a/templates/syslinux/boot.txt b/templates/syslinux/boot.txt
index 2fe3ead..56dffca 100644
--- a/templates/syslinux/boot.txt
+++ b/templates/syslinux/boot.txt
@@ -1,3 +1,3 @@
splash.rle
-Press F1control and F then 1 for help, or ENTER to \ No newline at end of file
+Press F1control and F then 1 for help, or ENTER to
diff --git a/templates/syslinux/f1.txt.install b/templates/syslinux/f1.txt.install
new file mode 100644
index 0000000..a26234f
--- /dev/null
+++ b/templates/syslinux/f1.txt.install
@@ -0,0 +1,25 @@
+ 0fWelcome to Debian GNU/Linux!07 09F107
+
+This is a Debian LIVE_DISTRIBUTION combined live and installation LIVE_MEDIA.
+It was built on LIVE_DATE.
+
+0fHELP INDEX07
+
+0fKEY TOPIC07
+
+<09F107> This page, the help index.
+<09F207> Prerequisites for installing Debian.
+<09F307> Boot methods for special ways of using this LIVE_MEDIA
+<09F407> Additional boot methods; rescue mode.
+<09F507> Special boot parameters, overview.
+<09F607> Special boot parameters for special machines.
+<09F707> Special boot parameters for selected disk controllers.
+<09F807> Special boot parameters for the install system.
+<09F907> How to get help.
+<09F1007> Copyrights and warranties.
+
+For F1-F9 type control and F then the digit 1-9
+For F10 type control and F then the digit 0
+
+
+Press F2 through F10 for details, or ENTER to
diff --git a/templates/syslinux/f1.txt b/templates/syslinux/f1.txt.live
index 2e8656c..5a6aecf 100644
--- a/templates/syslinux/f1.txt
+++ b/templates/syslinux/f1.txt.live
@@ -1,6 +1,6 @@
 0fWelcome to Debian GNU/Linux!07 09F107
-This is a Debian Live CD-ROM.
+This is a Debian LIVE_DISTRIBUTION live LIVE_MEDIA.
It was built on LIVE_DATE.
0fHELP INDEX07
@@ -9,8 +9,8 @@ It was built on LIVE_DATE.
<09F107> This page, the help index.
<09F207> Prerequisites for installing Debian.
-<09F307> Boot methods for special ways of using this CD-ROM
-<09F407> Additional boot methods; live and rescue modes.
+<09F307> Boot methods for special ways of using this LIVE_MEDIA
+<09F407> Additional boot methods.
<09F507> Special boot parameters, overview.
<09F607> Special boot parameters for special machines.
<09F707> Special boot parameters for selected disk controllers.
diff --git a/templates/syslinux/f2.txt b/templates/syslinux/f2.txt.install
index 60243d3..12c0b22 100644
--- a/templates/syslinux/f2.txt
+++ b/templates/syslinux/f2.txt.install
@@ -1,6 +1,12 @@
- 0fPREREQUISITES FOR INSTALLING DEBIAN07 09F207
+ 0fPREREQUISITES FOR USING DEBIAN07 09F207
-You must have at least 32 megabytes of RAM to use this Debian installer.
+You must have at least 64 megabytes of RAM to run this Debian Live system.
+
+See the Live Manual or the FAQ for more information; both
+documents are available at the Debian Live web site, 0fhttp://debian-live.alioth.debian.org/07
+
+
+You must have at least 32 megabytes of RAM to use the Debian installer.
You should have space on your hard disk to create a new disk partition
of at least 256 megabytes to install the base system. You'll need more
@@ -14,10 +20,4 @@ Thank you for choosing Debian!
-
-
-
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to \ No newline at end of file
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f2.txt.live b/templates/syslinux/f2.txt.live
new file mode 100644
index 0000000..f79062a
--- /dev/null
+++ b/templates/syslinux/f2.txt.live
@@ -0,0 +1,23 @@
+ 0fPREREQUISITES FOR RUNNING DEBIAN07 09F207
+
+You must have at least 64 megabytes of RAM to run this Debian Live system.
+
+See the Live Manual or the FAQ for more information; both
+documents are available at the Debian Live web site, 0fhttp://debian-live.alioth.debian.org/07
+
+Thank you for choosing Debian!
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f3.txt b/templates/syslinux/f3.txt.install
index 5f3996f..db59717 100644
--- a/templates/syslinux/f3.txt
+++ b/templates/syslinux/f3.txt.install
@@ -1,23 +1,23 @@
 0fBOOT METHODS07 09F307
-
0fAvailable boot methods:07
+0flive07
+ Start the live system -- this is the default LIVE_MEDIA method.
+0flive-failsafe07
+ Start the live system in fail-safe mode.
0finstall07
Start the installation.
-0finstallgui07
- Start the installation using the graphical installer.
0fexpert07
Start the installation in expert mode, for maximum control.
-0fexpertgui07
- Start the installation in expert mode using the graphical installer.
To use one of these boot methods, type it at the prompt, optionally
followed by any boot parameters. For example:
-
boot: install acpi=off
If unsure, you should use the default boot method, with no special
parameters, by simply pressing enter at the boot prompt.
+Except in expert mode, non-critical kernel boot messages are suppressed.
+
Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f3.txt.install.g-i b/templates/syslinux/f3.txt.install.g-i
new file mode 100644
index 0000000..445ddbd
--- /dev/null
+++ b/templates/syslinux/f3.txt.install.g-i
@@ -0,0 +1,23 @@
+ 0fBOOT METHODS07 09F307
+
+0fAvailable boot methods:07
+
+0flive07
+ Start the live system -- this is the default LIVE_MEDIA method.
+0flive-failsafe07
+ Start the live system in fail-safe mode.
+0finstall07 or 0finstallgui07
+ Start the installation using the normal or graphical installer.
+0fexpert07 and 0fexpertgui07
+ Start the installation in expert mode, for maximum control.
+
+To use one of these boot methods, type it at the prompt, optionally
+followed by any boot parameters. For example:
+ boot: install acpi=off
+
+If unsure, you should use the default boot method, with no special
+parameters, by simply pressing enter at the boot prompt.
+
+Except in expert mode, non-critical kernel boot messages are suppressed.
+
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f3.txt.live b/templates/syslinux/f3.txt.live
new file mode 100644
index 0000000..397c649
--- /dev/null
+++ b/templates/syslinux/f3.txt.live
@@ -0,0 +1,23 @@
+ 0fBOOT METHODS07 09F307
+
+0fAvailable boot methods:07
+
+0flive07
+ Start the live system -- this is the default LIVE_MEDIA method.
+0flive-failsafe07
+ Start the live system in fail-safe mode.
+
+
+
+
+
+
+
+To use one of these boot methods, type it at the prompt, optionally
+followed by any boot parameters. For example:
+ boot: live acpi=off
+
+If unsure, you should use the default boot method, with no special
+parameters, by simply pressing enter at the boot prompt.
+
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f4.txt.install b/templates/syslinux/f4.txt.install
new file mode 100644
index 0000000..106c30e
--- /dev/null
+++ b/templates/syslinux/f4.txt.install
@@ -0,0 +1,23 @@
+ 0fRESCUE MODE07 09F407
+
+0fUse one of these boot methods to rescue an existing install07
+
+0frescue07
+ Boot into rescue mode.
+
+0fmemtest07
+ Start memtest to scan your RAM for errors.
+0ffloppy07, 0fdisk107 or 0fdisk207
+ Boot from the floppy, first or second hard disk.
+
+
+
+To use one of these boot methods, type it at the prompt, optionally
+followed by any boot parameters. For example:
+
+ boot: rescue acpi=off
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f4.txt b/templates/syslinux/f4.txt.install.g-i
index 1167738..db29ea6 100644
--- a/templates/syslinux/f4.txt
+++ b/templates/syslinux/f4.txt.install.g-i
@@ -1,12 +1,4 @@
- 0fLIVE AND RESCUE MODES07 09F407
-
-
-0fUse one of these boot methods to start the live system07
-
-0flive07
- Start the live system in standard mode -- this is the default.
-0flive-failsafe07
- Start the live system in failsafe mode.
+ 0fRESCUE MODE07 09F407
0fUse one of these boot methods to rescue an existing install07
@@ -16,8 +8,16 @@
Boot into rescue mode using the graphical installer.
0fmemtest07
- Run memtest86+ (memory tester).
+ Start memtest to scan your RAM for errors.
0ffloppy07, 0fdisk107 or 0fdisk207
Boot from the floppy, first or second hard disk.
+To use one of these boot methods, type it at the prompt, optionally
+followed by any boot parameters. For example:
+
+ boot: rescue acpi=off
+
+
+
+
Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f4.txt.live b/templates/syslinux/f4.txt.live
new file mode 100644
index 0000000..6a76aca
--- /dev/null
+++ b/templates/syslinux/f4.txt.live
@@ -0,0 +1,23 @@
+ 0fADDITIONAL BOOT METHODS07 09F307
+
+0fAvailable boot methods:07
+
+0fmemtest07
+ Start memtest to scan your RAM for errors.
+0ffloppy07, 0fdisk107 or 0fdisk207
+ Boot from the floppy, first or second hard disk.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f5.txt b/templates/syslinux/f5.txt
index 6e73913..58bbb94 100644
--- a/templates/syslinux/f5.txt
+++ b/templates/syslinux/f5.txt
@@ -20,4 +20,4 @@ module.param=value, for example: libata.atapi_enabled=1
-Press F1control and F then 1 for the help index, or ENTER to \ No newline at end of file
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f6.txt b/templates/syslinux/f6.txt
index 4bdb09a..772fd50 100644
--- a/templates/syslinux/f6.txt
+++ b/templates/syslinux/f6.txt
@@ -7,17 +7,17 @@ If you use hex numbers you have to use the 0x prefix (e.g., 0x300).
HARDWARE PARAMETER TO SPECIFY07
IBM PS/1 or ValuePoint (IDE disk) 0fhd=0bcylinders0f,0bheads0f,0bsectors07
Some IBM ThinkPads 0ffloppy.floppy=thinkpad07
-IBM Pentium Microchannel 0fmca-pentium no-hlt07
Protect I/O port regions 0freserve=0biobase0f,0bextent07[0f,0b...07]
-Workaround faulty FPU (old machines) 0fno38707
Laptops with screen display problems 0fvga=77107
Use first serial port at 9600 baud 0fconsole=ttyS0,9600n807
Force use of generic IDE driver 0fgeneric.all_generic_ide=107
-If you experience lockups or other hardware failures,
+Possible (temporary) workarounds for lockups or other hardware failures:
disable buggy APIC interrupt routing 0fnoapic nolapic07
+(partly) disable ACPI 0facpi=noirq07 or 0facpi=off07
+disable USB 0fnousb07
For example:
boot: install vga=771 noapic nolapic
-Press F1control and F then 1 for the help index, or ENTER to \ No newline at end of file
+Press F1control and F then 1 for the help index, or ENTER to
diff --git a/templates/syslinux/f7.txt b/templates/syslinux/f7.txt
index 48f76c9..cd7ca7e 100644
--- a/templates/syslinux/f7.txt
+++ b/templates/syslinux/f7.txt
@@ -16,8 +16,8 @@ for more.
-For example:
+For example:
boot: install aic7xxx.aic7xxx=no_probe
-Press F1control and F then 1 for the help index, or ENTER to \ No newline at end of file
+Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT}
diff --git a/templates/syslinux/f8.txt b/templates/syslinux/f8.txt
index 04341b6..bc40696 100644
--- a/templates/syslinux/f8.txt
+++ b/templates/syslinux/f8.txt
@@ -1,6 +1,6 @@
 0fSPECIAL BOOT PARAMETERS - INSTALLATION SYSTEM07 09F807
-You can use the following boot parameters at the 0fboot:07 prompt,
+You can use the following boot parameters at the 0fboot:07 prompt,
in combination with the boot method (see <09F307>). These parameters
control how the installer works.
0f
@@ -8,7 +8,6 @@ RESULT PARAMETER07
Verbose debugging 0fDEBCONF_DEBUG=507
Debug boot sequence 0fBOOT_DEBUG=2|307
Disable framebuffer 0ffb=false07
-Don't probe for USB 0fdebian-installer/probe/usb=false07
Don't start PCMCIA 0fhw-detect/start_pcmcia=false07
Force static network config 0fnetcfg/disable_dhcp=true07
Set keyboard map 0fbootkbd=es07
@@ -16,8 +15,9 @@ Use Braille tty 0fbrltty=driver,device,texttable07
Use high contrast accessibility theme 0ftheme=dark07
Use special tasks 0ftasks="kde-desktop, standard"07
-For example:
+
+For example:
boot: install fb=false
-Press F1control and F then 1 for the help index, or ENTER to \ No newline at end of file
+Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT}
diff --git a/templates/syslinux/f9.txt b/templates/syslinux/f9.txt.install
index b0cac8d..b6acea6 100644
--- a/templates/syslinux/f9.txt
+++ b/templates/syslinux/f9.txt.install
@@ -11,13 +11,13 @@ experience!
See the Installation Manual or the FAQ for more information; both
documents are available at the Debian web site, 0fhttp://www.debian.org/07
+If you can't run the Debian Live system, see the Installation Manual or
+the FAQ for more information; both documents are available at
+the Debian web site, 0fhttp://debian-live.alioth.debian.org/07
-
-
-
-Press F1control and F then 1 for the help index, or ENTER to \ No newline at end of file
+Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT}
diff --git a/templates/syslinux/f9.txt.live b/templates/syslinux/f9.txt.live
new file mode 100644
index 0000000..f39ec37
--- /dev/null
+++ b/templates/syslinux/f9.txt.live
@@ -0,0 +1,23 @@
+ 0fGETTING HELP07 09F907
+
+If you can't run Debian, don't despair! The Debian team is ready to
+help you! We are especially interested in hearing about boot
+problems, because in general they don't happen to only 0fone07 person.
+We've either already heard about your particular problem and can dispense a
+quick fix, or we would like to hear about it and work through it with you,
+and the next user who comes up with the same problem will profit from your
+experience!
+
+See the Live Manual or the FAQ for more information; both
+documents are available at the Debian web site,
+0fhttp://debian-live.alioth.debian.org/07
+
+
+
+
+
+
+
+
+
+Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT}
diff --git a/templates/syslinux/syslinux.cfg b/templates/syslinux/syslinux.cfg
index 733a5eb..48599ed 100644
--- a/templates/syslinux/syslinux.cfg
+++ b/templates/syslinux/syslinux.cfg
@@ -20,17 +20,17 @@ LINUX_INSTALL
MEMTEST
-#LABEL floppy
-# localboot 0x00
+LABEL floppy
+ localboot 0x00
-#LABEL disk1
-# localboot 0x80
+LABEL disk1
+ localboot 0x80
-#LABEL disk2
-# localboot 0x81
+LABEL disk2
+ localboot 0x81
-#LABEL nextboot
-# localboot -1
+LABEL nextboot
+ localboot -1
PROMPT 1
TIMEOUT 0