diff options
Diffstat (limited to 'manpages/de/lh_config.de.1')
| -rw-r--r-- | manpages/de/lh_config.de.1 | 720 |
1 files changed, 0 insertions, 720 deletions
diff --git a/manpages/de/lh_config.de.1 b/manpages/de/lh_config.de.1 deleted file mode 100644 index 4775343..0000000 --- a/manpages/de/lh_config.de.1 +++ /dev/null @@ -1,720 +0,0 @@ -.\"******************************************************************* -.\" -.\" This file was generated with po4a. Translate the source file. -.\" -.\"******************************************************************* -.TH LIVE\-HELPER 1 14.08.2010 2.0~a23 "Debian Live Projekt" - -.SH NAME -\fBlh config\fP \- Erstellen des config Verzeichnisses - -.SH ÜBERSICHT -\fBlh config\fP [\fIlive\-helper Opitonen\fP] -.PP -.\" FIXME -\fBlh config\fP -.br -\fB [\-\-apt\fP apt|aptitude] -.br - [\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP] -.br - [\fB\-\-apt\-http\-proxy\fP \fIURL\fP] -.br - [\fB\-\-apt\-pdiffs\fP true|false] -.br - [\fB\-\-apt\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"] -.br - [\fB\-\-aptitude\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"] -.br - [\fB\-\-apt\-pipeline\fP \fIDEPTH\fP] -.br - [\fB\-\-apt\-recommends\fP true|false] -.br - [\fB\-\-apt\-secure\fP true|false] -.br - [\-a|\fB\-\-architecture\fP \fIARCHITECTURE\fP] -.br - [\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|net|tar|usb\-hdd] -.br - [\fB\-\-binary\-filesystem\fP fat16|fat32|ext2] -.br - [\fB\-\-binary\-indices\fP true|false|none] -.br - [\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP] -.br - [\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP] -.br - [\fB\-\-bootloader\fP grub|syslinux|yaboot] -.br - [\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap|copy] -.br - [\fB\-\-bootstrap\-config\fP \fIFILE\fP] -.br - [\-f|\fB\-\-bootstrap\-flavour\fP minimal|standard] -.br - [\fB\-\-bootstrap\-keyring\fP \fIPACKAGE\fP] -.br - [\fB\-\-cache\fP true|false] -.br - [\fB\-\-cache\-indices\fP true|false] -.br - [\fB\-\-cache\-packages\fP true|false] -.br - [\fB\-\-cache\-stages\fP \fISTAGE\fP|\fI"STAGES"\fP] -.br - [\fB\-\-checksums\fP md5|sha1|sha256|none] -.br - [\fB\-\-build\-with\-chroot\fP true|false] -.br - [\fB\-\-chroot\-filesystem\fP ext2|ext3|squashfs|plain|jffs2] -.br - [\fB\-\-clean]\fP -.br -\fB [\-c|\-\-conffile\fP \fIFILE\fP] -.br - [\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline] -.br - [\fB\-\-debconf\-nowarnings\fP true|false] -.br - [\fB\-\-debconf\-priority\fP low|medium|high|critical] -.br - [\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false] -.br - [\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP] -.br - [\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP] -.br - [\fB\-\-debian\-installer\-gui\fP true|false] -.br - [\-d|\fB\-\-distribution\fP \fICODENAME\fP] -.br - [\-\-\fBdump\fP] -.br - [\-e|\fB\-\-encryption\fP false|aes128|aes192|aes256] -.br - [\fB\-\-fdisk\fP fdisk|fdisk.dist] -.br - [\fB\-\-grub\-splash\fP \fIFILE\fP] -.br - [\fB\-\-gzip\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"] -.br - [\fB\-\-hooks\fP \fIFILE\fP] -.br - [\fB\-\-hostname\fP \fINAME\fP] -.br - [\fB\-\-ignore\-system\-defaults\fP] -.br - [\fB\-\-includes\fP \fIPATH\fP] -.br - [\fB\-\-initramfs\fP auto|live\-initramfs|casper] -.br - [\fB\-\-interactive\fP shell] -.br - [\fB\-\-iso\-application\fP \fINAME\fP] -.br - [\fB\-\-iso\-preparer\fP \fINAME\fP] -.br - [\fB\-\-iso\-publisher\fP \fINAME\fP] -.br - [\fB\-\-iso\-volume\fP \fINAME\fP] -.br - [\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP] -.br - [\fB\-\-keyring\-packages\fP \fIPACKAGE|"PACKAGES"\fP] -.br - [\-l|\fB\-\-language\fP \fILANGUAGE\fP] -.br - [\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\fI"FLAVOURS"\fP] -.br - [\fB\-\-linux\-packages\fP \fI"PACKAGES"\fP] -.br - [\fB\-\-losetup\fP losetup|losetup.orig] -.br - [\fB\-\-memtest\fP memtest86+|memtest86|none] -.br - [\-m|\fB\-\-mirror\-bootstrap\fP \fIURL\fP] -.br - [\fB\-\-mirror\-binary\fP \fIURL\fP] -.br - [\fB\-\-mirror\-binary\-security\fP \fIURL\fP] -.br - [\fB\-\-mirror\-chroot\fP \fIURL\fP] -.br - [\fB\-\-mirror\-chroot\-security\fP \fIURL\fP] -.br - [\fB\-\-mirror\-debian\-installer\fP \fIURL\fP] -.br - [\fB\-\-mode\fP debian|emdebian|ubuntu] -.br - [\fB\-\-net\-root\-filesystem\fP nfs|cfs] -.br - [\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP] -.br - [\fB\-\-net\-root\-path\fP \fIPATH\fP] -.br - [\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP] -.br - [\fB\-\-net\-cow\-filesystem\fP nfs|cfs] -.br - [\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP] -.br - [\fB\-\-net\-cow\-path\fP \fIPATH\fP] -.br - [\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP] -.br - [\fB\-\-net\-tarball\fP bzip2|gzip|tar|none] -.br - [\-p|\fB\-\-packages\-lists\fP \fILIST\fP|\fI"LISTS"\fP] -.br - [\fB\-\-packages\fP \fIPACKAGE\fP|\fI"PACKAGES"\fP] -.br - [\fB\-r, \-\-repositories \fP\fIREPOSITORY\fP|\fI"REPOSITORIES"\fP] -.br - [\fB\-\-root\-command\fP sudo] -.br - [\fB\-\-use\-fakeroot\fP true|false] -.br - [\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\fI"ARCHIVE_AREAS"\fP] -.br - [\fB\-\-security\fP true|false] -.br - [\fB\-\-source\fP true|false] -.br - [\-s|\fB\-\-source\-images\fP iso|net|tar|usb\-hdd] -.br - [\fB\-\-symlinks\fP true|false] -.br - [\fB\-\-syslinux\-splash\fP \fIFILE\fP] -.br - [\fB\-\-syslinux\-timeout\fP \fISECONDS\fP] -.br - [\fB\-\-syslinux\-menu\fP true|false] -.br - [\fB\-\-sysvinit\fP true|false] -.br - [\fB\-\-tasksel\fP aptitude|tasksel] -.br - [\fB\-\-tasks\fP \fITASK\fP|"\fITASKS\fP"] -.br - [\fB\-\-templates\fP \fIPATH\fP] -.br - [\fB\-\-virtual\-root\-filesystem\fP ext3] -.br - [\fB\-\-virtual\-root\-size \fP\fIMB\fP] -.br - [\fB\-\-exposed\-root\fP true|false] -.br - [\fB\-\-username\fP \fINAME\fP] -.br -.\" FIXME - [\fB\-\-win32\-loader true|false]\fP - -.SH BESCHREIBUNG -\fBlh config\fP is a high\-level command (porcelain) of \fIlive\-helper\fP(7), the -Debian Live tool suite. -.PP -.\" FIXME -\fBlh config\fP populates the configuration directory for live\-helper. By -default, this directory is named 'config' and is created in the current -directory where \fBlh config\fP was executed. -.PP -.\" FIXME -Note: Currently \fBlh config\fP tries to be smart and sets defaults for some -options depending on the setting of other options (e.g. which linux packages -to be used depending on if a lenny system gets build or not). This means -that when generating a new configuration, you should call \fBlh config\fP only -once with all options specified. Calling it several times with only a subset -of the options each can result in non working configurations. This is also -caused by the fact that \fBlh config\fP called with one option only changes -that option, and leaves everything else as is unless its not -defined. However, \fBlh config\fP does warn about know impossible or likely -impossible combinations that would lead to non working live systems. If -unsure, remove config/{binary,bootstrap,chroot,common,source} and call \fBlh -config\fP again. - -.SH OPTIONEN -In addition to its specific options \fBlh config\fP understands all generic -live\-helper options. See \fIlive\-helper\fP(7) for a complete list of all -generic live\-helper options. -.PP -.\" FIXME -.IP "\fB\-\-apt\fP apt|aptitude" 4 -defines if apt\-get or aptitude is used to install packages when building the -image. When building etch images, this defaults to aptitude. Every other -distribution defaults to apt. -.IP "\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP" 4 -sets the ftp proxy to be used by apt. By default, this is empty but if the -host has the environment variable ftp_proxy set, apt\-ftp\-proxy gets -automatically set to the value of ftp_proxy. -.IP "\fB\-\-apt\-http\-proxy\fP \fIURL\fP" 4 -sets the http proxy to be used by apt. By default, this is empty but if the -host has the environment variable http_proxy set, apt\-http\-proxy gets -automatically set to the value of http_proxy. -.IP "\fB\-\-apt\-pdiffs\fP true|false" 4 -defines whetever apt should use incremental package indices feature or -not. This is true by default. -.IP "\fB\-\-apt\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4 -defines the default options that will be appended to every apt call that is -made inside chroot during the building of the image. By default, this is set -to \-\-yes to allow non\-interactive installation of packages. -.IP "\fB\-\-aptitude\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4 -defines the default options that will be appended to every aptitude call -that is made inside chroot during building of the image. By default, this is -set to \-\-assume\-yes to allow non\-interactive installation of packages. -.IP "\fB\-\-apt\-pipeline\fP \fIDEPTH\fP" 4 -sets the depth of the apt/aptitude pipeline. In cases where the remote -server is not RFC conforming or buggy (such as Squid 2.0.2) this option can -be a value from 0 to 5 indicating how many outstanding requests APT should -send. A value of zero MUST be specified if the remote host does not properly -linger on TCP connections \- otherwise data corruption will occur. Hosts -which require this are in violation of RFC 2068. By default, live\-helper -does not set this option. -.IP "\fB\-\-apt\-recommends\fP true|false" 4 -defines if apt should install recommended packages automatically. By -default, this is true except in emdebian mode. -.IP "\fB\-\-apt\-secure\fP true|false" 4 -defines if apt should check repository signatures. This is true by default. -.IP "\-a|\fB\-\-architecture\fP \fIARCHITECTURE\fP" 4 -defines the architecture of the to be build image. By default, this is set -to the host architecture. Note that you cannot crossbuild for another -architecture if your host system is not able to execute binaries for the -target architecture natively. For example, building amd64 images on i386 and -vice versa is possile if you have a 64bit capable i386 processor and the -right kernel. But building powerpc images on an i386 system is not possible. -.IP "\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|net|tar|usb\-hdd" 4 -defines the image type to build. By default this is set to iso to build -CD/DVD images, for squeeze and newer it defaults to iso\-hybrid. -.IP "\fB\-\-binary\-filesystem\fP fat16|fat32|ext2" 4 -defines the filesystem to be used in the image type. This only has an effect -if the selected binary image type does allow to choose a filesystem. For -example, when selection iso the resulting CD/DVD has always the filesystem -ISO9660. When building usb\-hdd images for usb sticks, this is active. Note -that it defaults to fat16 on all architectures except sparc where it -defaults to ext2. Also note that if you choose fat16 and your resulting -binary image gets bigger than 2GB, the binary filesystem automatically gets -switched to fat32. -.IP "\fB\-\-binary\-indices\fP true|false|none" 4 -defines if the resulting images should have binary indices or not and -defaults to true. If set to none, no indices are included at all. -.IP "\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4 -sets boot parameters specific to debian\-installer, if included. -.IP "\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4 -sets boot parameters specific to debian\-live. A complete list of boot -parameters can be found, for etch, in the manpage of casper, for all other -distributions in the manpage of live\-initramfs. On the images, a list of all -parameters (without comments) is included in the /parameters.txt. -.IP "\fB\-\-bootloader\fP grub|syslinux|yaboot" 4 -defines which bootloader is beeing used in the generated image. This has -only an effect if the selected binary image type does allow to choose the -bootloader. For example, if you build a iso, always syslinux (or more -precise, isolinux) is being used. Also note that some combinations of binary -images types and bootloaders may be possible but live\-helper does not -support them yet. \fBlh config\fP will fail to create such a not yet supported -configuration and give a explanation about it. For usb\-hdd images on amd64 -and i386, the default is syslinux. yaboot is only used on powerpc. -.IP "\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap|copy" 4 -defines which program is used to bootstrap the debian chroot, default is -debootstrap. Note that if you set the bootstrap program to copy, then your -host system is copied. This can be useful if you want to convert/clone your -existing host system into a live system, however, make sure you do have -enough free space as this can, depending on your host system, get quite big. -.IP "\fB\-\-bootstrap\-config\fP \fIFILE\fP" 4 -sets a custom configuration file for the boostrap programm of choice and is -empty by default. Refere to the documentation of debootstrap or cdebootstrap -for more information about that. When the bootstrap program is set to copy, -this has no effect. -.IP "\-f|\fB\-\-bootstrap\-flavour\fP minimal|standard" 4 -defines if the bootstrap program should bootstrap the standard system (all -packages of priority required and important, which is the default) or a -minimal system (only packages of priority required, plus apt). -.IP "\fB\-\-bootstrap\-keyring\fP \fIPACKAGE\fP" 4 -sets the archive keyring package to be used. Default is -debian\-archive\-keyring. -.IP "\fB\-\-cache\fP true|false" 4 -defines globally if any cache should be used at all. Different caches can be -controled through the their own options. -.IP "\fB\-\-cache\-indices\fP true|false" 4 -defines if downloaded package indices and lists should be cached which is -false by default. Enabling it would allow to rebuild an image completely -offline, however, you would not get updates anymore then. -.IP "\fB\-\-cache\-packages\fP true|false" 4 -defines if downloaded packages files should be cached which is true by -default. Disabling it does save space consumtion in your build directory, -but remember that you will cause much unnecessary traffic if you do a couple -of rebuilds. In general you should always leave it true, however, in some -particular rare build setups, it can be faster to refetch packages from the -local network mirror rather than to utilize the local disk. -.IP "\fB\-\-cache\-stages\fP true|false|\fISTAGE\fP|\(dq\fISTAGES\fP\(dq" 4 -sets which stages should be cached. By default set to bootstrap. As an -exception to the normal stage names, also rootfs can be used here which does -only cache the generated root filesystem in -filesystem.{dir,ext*,squashfs}. This is useful during development if you -want to rebuild the binary stage but not regenerate the root filesystem all -the time. -.IP "\fB\-\-checksums\fP md5|sha1|sha256|none" 4 -defines if the binary image should contain a file called md5sums.txt, -sha1sums.txt and/or sha256sums.txt. These lists all files on the image -together with their checksums. This in turn can be used by live\-initramfs' -built\-in integrity\-check to verify the medium if specified at boot -prompt. In general, this should not be false and is an important feature of -live system released to the public. However, during development of very big -images it can save some time by not calculating the checksums. -.IP "\fB\-\-build\-with\-chroot\fP true|false" 4 -defines whetever live\-helper should use the tools from within the chroot to -build the binary image or not by using and including the host systems -tools. This is a very dangerous option, using the tools of the host system -can lead to tainted and even non\-bootable images if the host systems version -of the required tools (mainly these are the bootloaders such as syslinux, -grub and yaboot, and the auxilliary tools such as dosfstools, genisoimage, -squashfs\-tools and others) do not \fBexactely\fP match what is present at -build\-time in the target distribution. Never do disable this option unless -you are \fBexactely\fP sure what you are doing and have \fBcompletely\fP\fI -understood its consequences.\fP -.IP "\fB\-\-chroot\-filesystem\fP ext2|ext3|squashfs|plain|jffs2" 4 -defines which filesystem type should be used for the root filesystem -image. If you use plain, then no filesystem image is created and the root -filesystem content is copied on the binary image filesystem as flat -files. Depending on what binary filesystem you have choosen, it may not be -possible to build with a plain root filesystem, e.g. fat16/fat32 and plain -don't work as linux does not support to run on them. -.IP \fB\-\-clean\fP 4 -minimizes config directory by automatically removing unused and thus empty -subdirectories. -.IP "\-c|\fB\-\-conffile\fP \fIFILE\fP" 4 -using a user specified alternative configuration file in addition to the -normally used one in the config directory. -.IP "\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline" 4 -defines what value the debconf frontend should be set to inside the -chroot. Note that setting it to anything by noninteractive, which is the -default, makes your build asking questions during the build. -.IP "\fB\-\-debconf\-nowarnings\fP true|false" 4 -defines if warnings of debconf should be displayed or not. Warnings from -debconf are generally very rare and by default, we skipp them, if any, in -order to keep the build process entirely non interactive. -.IP "\fB\-\-debconf\-priority\fP low|medium|high|critical" 4 -defines what value the debconf priority shoul dbe set to inside the -chroot. By default, it is set to critical, which means that almost no -questions are displayed. Note that this only has an effect if you use any -debconf frontend different from noninteractive. -.IP "\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false" 4 -defines which type, if any, of the debian\-installer should be included in -the resulting binary image. By default, no installer is included. All -available flavours except live are the identical configurations used on the -installer media produced by regular debian\-cd. When live is choosen, the -live\-installer udeb is included so that debian\-installer will behave -different than usual \- instead of installing the debian system from packages -from the medium or the network, it installs the live system to the disk. -.IP "\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP" 4 -defines the distribution where the debian\-installer files should be taken -out from. Normally, this should be set to the same distribution as the live -system. However, some times, one wants to use a newer or even daily built -installer. -.IP "\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP" 4 -sets the filename or URL for an optionally used and included preseeding file -for debian\-installer. -.IP "\fB\-\-debian\-installer\-gui\fP true|false" 4 -defines if the debian\-installer graphical GTK interface should be true or -not. In Debian mode and for most versions of Ubuntu, this option is true, -whereas otherwise false, by default. -.IP "\-d|\fB\-\-distribution\fP \fICODENAME\fP" 4 -defines the distribution of the resulting live system. -.IP \-\-\fBdump\fP 4 -prepares a report of the currently present live system configuration and the -version of live\-helper used. This is useful to provide if you submit bug -reports, we do get all informations required for us to locate and replicate -an error. -.IP "\-e|\fB\-\-encryption\fP false|aes128|aes192|aes256" 4 -defines if the root filesystem should be encrypted or not. By default, this -is false. -.IP "\fB\-\-fdisk\fP fdisk|fdisk.dist" 4 -sets the filename of the fdisk binary from the host system that should be -used. This is autodetected and does generally not need any customization. -.IP "\fB\-\-grub\-splash\fP \fIFILE\fP" 4 -defines the name of an optional to be included splash screen graphic for the -grub bootloader. -.IP "\fB\-\-gzip\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4 -defines the default options that will be appended to (almost) every gzip -call during the building of the image. By default, this is set to \-\-best to -use highest (but slowest) compression. Dynamically, if the host system -supports it, also \-\-rsyncable is added. -.IP "\fB\-\-hooks\fP \fIFILE\fP" 4 -defines which hooks available in /usr/share/live/build/examples/hooks should -be activated. Normally, there are no hooks executed. Make sure you know and -understood the hook before you enable it. -.IP "\fB\-\-hostname\fP \fINAME\fP" 4 -sets the hostname of the live system. -.IP \fB\-\-ignore\-system\-defaults\fP 4 -\fBlh config\fP by default reads system defaults from /etc/default/live\-helper -when generating a new live system config directory. This is useful if you -want to set global settings, such as mirror locations, and don't want to -specify them all of the time. -.IP "\fB\-\-includes\fP \fIPATH\fP" 4 -sets the path to the includes that live\-helper is going to use, -e.g. additional minimal documentation that you want to have on all live -systems. By default, this is set to /usr/share/live/build/includes/. -.IP "\fB\-\-initramfs\fP auto|live\-initramfs|casper" 4 -sets the name of package that contains the live system specific initramfs -modification. By default, auto is used, which means that at build time of -the image rather than on configuration time, the value will be expanded to -casper when building etch systems and to live\-initramfs for all other -systems. -.IP "\fB\-\-interactive\fP shell" 4 -defines if after the chroot stage and before the beginning of the binary -stage, a interactive shell login should be spawned in the chroot in order to -allow you to do manual customizations. Once you close the shell with logout -or exit, the build will continue as usual. Note that it's strongly -discouraged to use this for anything else than testing. Modifications that -should be present in all builds of a live system should be properly made -through hooks. Everything else destroys the beauty of being able to -completely automatise the build process and making it non interactive. By -default, this is of course false. -.IP "\fB\-\-iso\-application\fP \fINAME\fP" 4 -sets the APPLICATION field in the header of a resulting CD/DVD image and -defaults to "Debian Live" in debian mode, and to "Emdebian Live" in emdebian -mode, and "Ubuntu Live" in ubuntu mode. -.IP "\fB\-\-iso\-preparer\fP \fINAME\fP" 4 -sets the PREPARER field in the header of a resulting CD/DVD image. By -default this is set to "live\-helper \fIVERSION\fP; -http://packages.qa.debian.org/live\-helper", whereas VERSION is expanded to -the version of live\-helper that was used to build the image. -.IP "\fB\-\-iso\-publisher\fP \fINAME\fP" 4 -sets the PUBLISHED field in the header of a resulting CD/DVD image. By -default, this is set to 'Debian Live project; http:/live.debian.net/; -debian\-live@lists.debian.org'. Remember to change this to the appropriate -values at latest when you distributing custom and unofficial images. -.IP "\fB\-\-iso\-volume\fP \fINAME\fP" 4 -sets the VOLUME field in the header of a resulting CD/DVD and defaults to -\&'(\fIMODE\fP) (\fIDISTRIBUTION\fP) (\fIDATE\fP)' whereas MODE is expanded to the name -of the mode in use, DISTRIBUTION the distribution name, and DATE with the -current date and time of the generation. When running in debian\-release mode -however, it will instead default to 'Debian (\fIVERSION\fP) (\fIARCHITECTURE\fP) -live' where VERSION becomes the numerical version of the release being built -and ARCHITECTURE becomes the name of the architecture. -.IP "\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP" 4 -sets the eraseblock size for a JFFS2 (Second Journalling Flash File System) -filesystem. The default is 64 KiB. If you use an erase block size different -than the erase block size of the target MTD device, JFFS2 may not perform -optimally. If the SIZE specified is below 4096, the units are assumed to be -KiB. -.IP "\fB\-\-keyring\-packages\fP \fIPACKAGE|\(dqPACKAGES\fP\(dq" 4 -sets the keyring package or additional keyring packages. By default this is -set to debian\-archive\-keyring. -.IP "\-l|\fB\-\-language\fP \fILANGUAGE\fP" 4 -sets the language of a live system by installing l10n related packages. It -doesn't enable generation of the correct locales through setting the right -boot parameters, those need to be done through the bootappend\-live -parameter. -.IP "\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\(dq\fIFLAVOURS\fP\(dq" 4 -sets the kernel flavours to be installed. Note that in case you specify more -than that the first will be configured the default kernel that gets booted. -.IP "\fB\-\-linux\-packages\fP \(dq\fIPACKAGES\fP\(dq" 4 -sets the internal name of the kernel packages naming scheme. If you use -debian kernel packages, you will not have to adjust it. If you decide to use -custom kernel packages that do not follow the debian naming scheme, remember -to set this option to the stub of the packages only (for debian this is -linux\-image\-2.6), so that \fISTUB\fP\-\fIFLAVOUR\fP results in a valid package name -(for debian e.g. linux\-image\-2.6\-486). Preferably you use the meta package -name, if any, for the stub, so that your configuration is ABI -independent. Also don't forget that you have to include stubs of the binary -modules packages for unionfs or aufs, and squashfs if you built them -out\-of\-tree. -.IP "\fB\-\-losetup\fP losetup|losetup.orig" 4 -sets the filename of the losetup binary from the host system that should be -used. This is autodetected and does generally not need any customization. -.IP "\fB\-\-memtest\fP memtest86+|memtest86|none" 4 -defines if memtest, memtest86+ or no memory tester at all should be included -as secondary bootloader configuration. This is only available on amd64 and -i386 and defaults to memtest86+. -.IP "\-m|\fB\-\-mirror\-bootstrap\fP \fIURL\fP" 4 -sets the location of the debian package mirror that should be used to -bootstrap from. -.IP "\fB\-\-mirror\-binary\fP \fIURL\fP" 4 -sets the location of the debian package mirror that should end up configured -in the final image and which is the one a user would see and use. This has -not necessarily to be the same that is used to build the image, e.g. if you -use a local mirror but want to have an official mirror in the image. By -default, 'http://cdn.debian.net/debian/' is used. -.IP "\fB\-\-mirror\-binary\-security\fP \fIURL\fP" 4 -sets the location of the debian security package mirror that should end up -configuered in the final image. By default, -\&'http://cdn.debian.net/debian\-security/' is used. -.IP "\fB\-\-mirror\-chroot\fP \fIURL\fP" 4 -sets the location of the debian package mirror that will be used to fetch -the packages in order to build the live system. By default, this points to -http://ftp.de.debian.org/debian/ which may not be a good default if you live -outside the U.S. -.IP "\fB\-\-mirror\-chroot\-security\fP \fIURL\fP" 4 -sets the location of the debian security package mirror that will be used to -fetch the packages in order to build the live system. By default, this -points to http://security.debian.org/debian/. -.IP "\fB\-\-mirror\-debian\-installer\fP \fIURL\fP" 4 -sets the location of the mirror that will be used to fetch the debian -installer images. By default, this points to the same mirror used to build -the live system. -.IP "\fB\-\-mode\fP debian|emdebian|ubuntu" 4 -defines a global mode to load project specific defaults. By default this is -set to debian. -.IP "\fB\-\-net\-root\-filesystem\fP nfs|cfs" 4 -defines the filesystem that will be configured in the bootloader -configuration for your netboot image. This defaults to nfs. -.IP "\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP" 4 -sets additional options for mounting the root filesystem in netboot images -and is by default empty. -.IP "\fB\-\-net\-root\-path\fP \fIPATH\fP" 4 -sets the file path that will be configured in the bootloader configuration -for your netboot image. This defaults to /srv/debian\-live in debian mode and -to /srv/emebian\-live when being in emdebian mode, and /srv/ubuntu\-live when -in ubuntu mode. -.IP "\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4 -sets the IP or hostname that will be configured in the bootloader -configuration for the root filesystem of your netboot image. This defaults -to 192.168.1.1. -.IP "\fB\-\-net\-cow\-filesystem\fP nfs|cfs" 4 -defines the filesystem type for the copy\-on\-write layer and defaults to nfs. -.IP "\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP" 4 -sets additional options for mounting the copy\-on\-write layer in netboot -images and is by default empty. -.IP "\fB\-\-net\-cow\-path\fP \fIPATH\fP" 4 -defines the path to client writable filesystem. Anywhere that -\fIclient_mac_address\fP is specified in the path live\-initramfs will -substitute the MAC address of the client delimited with hyphens. -.PP -.IP "" 4 -Example: -.br -/export/hosts/client_mac_address -.br -/export/hosts/00\-16\-D3\-33\-92\-E8 -.IP "\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4 -sets the IP or hostname that will be configured in the bootloader -configuration for the copy\-on\-write filesystem of your netboot image and is -by default empty. -.IP "\fB\-\-net\-tarball\fP bzip2|gzip|tar|none" 4 -defines the format of the netboot image. Choosing tar results in a not -compressed tarball, bzip2 and gzip in a bzip2 resp. gzip compressed -tarball. Choosing none leads to no tarball at all, the plain binary -directory is considered the output in this case. Default is gzip. -.IP "\-p|\fB\-\-packages\-lists\fP \fILIST\fP|\(dq\fILISTS\fP\(dq" 4 -defines which lists available in /usr/share/live/build/lists should be -used. By default, this is set to standard. Note that in case you have local -packages lists, you don't need to list them here. Putting them into -config/chroot_local\-packageslists is enough (the filename needs to have the -\&.list suffix though). -.IP "\fB\-\-packages\fP \fIPACKAGE\fP|\(dq\fIPACKAGES\fP\(dq" 4 -defines one or more packages to be installed in the live system. This is a -quick and convenient place to add a few packages when building an image -(limited by the max length of shell). Packages that should be permanently -installed should be put into a local packages list. -.IP "\fB\-r, \-\-repositories\fP \fIREPOSITORY\fP|\(dq\fIREPOSITORIES\fP\(dq" 4 -enables one of available third\-party repository configurations in -/usr/share/live/build/repositories. -.IP "\fB\-\-root\-command\fP sudo" 4 -controls if live\-helper should use sudo internally to build the live -image. Note that this is not well tested and that you should, when relying -on sudo, call the individual live\-helper command with sudo itself. -.IP "\fB\-\-use\-fakeroot\fP true|false" 4 -controls if live\-helper should utilize fakeroot and fakechroot to try and -avoid requiring root privillages where possible. By default, this option is -false. -.IP "\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\(dq\fIARCHIVE_AREAS\fP\(dq" 4 -defines which package archive areas of a debian packages archive should be -used for configured debian package mirrors. By default, this is set to -main. Remember to check the licenses of each packages with respect to their -redistributability in your juristiction when enabling contrib or non\-free -with this mechanism. -.IP "\fB\-\-security\fP true|false" 4 -defines if the security repositories specified in the security mirror -options should be used or not. -.IP "\fB\-\-source\fP true|false" 4 -defines if a corresponding source image to the binary image should be -build. By default this is false because most people do not require this and -would require to download quite a few source packages. However, once you -start distributing your live image, you should make sure you build it with a -source image alongside. -.IP "\-s|\fB\-\-source\-images\fP iso|net|tar|usb\-hdd" 4 -defines the image type for the source image. Default is tar. -.IP "\fB\-\-symlinks\fP true|false" 4 -defines if the symlink hack should be true or false. The symlink hack -converts all absolute symlinks to relative ones. By default this is false -and in general there is no need or gain to enable it. If you are in a -special situation that requires this, you will know. -.IP "\fB\-\-syslinux\-splash\fP \fIFILE\fP" 4 -defines the file of the syslinux splash graphic that should be used instead -of the default one. -.IP "\fB\-\-syslinux\-timeout\fP \fISECONDS\fP" 4 -defines the timeout the syslinux bootloader should wait for input from the -user at the bootprompt prior booting the default kernel. This defaults to 0 -which means it will wait forever. -.IP "\fB\-\-syslinux\-menu\fP true|false" 4 -defines if syslinux should be make use of the vgamenu capabilities or not. -.IP "\fB\-\-sysvinit\fP true|false" 4 -defines if the sysvinit hack should be true or false. The sysvinit hack -disables all non\-essential services from starting up at bootup in order to -reduce overall boottime. By default this is false and in general there you -don't want to enable it. -.IP "\fB\-\-tasksel\fP aptitude|tasksel" 4 -selects which program is used to install tasks. By default, this is set to -tasksel. -.IP "\fB\-\-tasks\fP \fITASK\fP|\(dq\fITASKS\fP\(dq" 4 -defines one or more package tasks to be installed in the live system. This -is a quick and convenient way to get a reasonable default selection of -packages suitable for most users when building an image, but it results in -quite big images. If you want to have finer grained package selections, -local packages lists should be used instead. -.IP "\fB\-\-templates\fP \fIPATH\fP" 4 -sets the path to the templates that live\-helper is going to use, e.g. for -bootloaders. By default, this is set to /usr/share/live/build/templates/. -.IP "\fB\-\-virtual\-root\-filesystem\fP ext3" 4 -defines what filesystem to format the root filesystem when building -virtual\-hdd images. -.IP "\fB\-\-virtual\-root\-size\fP MB" 4 -defines what size the virtual\-hdd image should be. Note that although the -default is set to 10000 (= 10GB), it will not need 10GB space on your -harddisk as the files are created as sparse files. -.IP "\fB\-\-exposed\-root\fP true|false" 4 -defines whether to expose the root filesystem as read only and not covered -by the union filesystem. This has useful implications for certain speciality -setups such as LTSP. By default, this option is false. -.IP "\fB\-\-username\fP \fINAME\fP" 4 -sets the name of the account of the default user in the live system. -.IP "\fB\-\-win32\-loader true|false\fP" 4 -.\" FIXME -defines if win32\-loader should be included in the binary image or not. - -.SH ENVIRONMENT -.\" FIXME -.\" FIXME -All command line switches can also be specified through the corresponding -environment variable. Environment variables are name LH_FOO, means, -e.g. \-\-apt\-ftp\-proxy becomes LH_APT_FTP_PROXY. However, this generally -should not be used. - -.SH DATEIEN -.\" FIXME -.IP \fBauto/config\fP 4 -.IP \fB/etc/default/live\-helper\fP 4 -.\" FIXME -An optional, global configuration file for \fBlh config\fP variables. It is -useful to specify a few system wide defaults, like LH_MIRROR_BOOTSTRAP. This -feature can be false by specifying the \fB\-\-ignore\-system\-defaults\fP option. - -.SH "SIEHE AUCH" -\fIlive\-helper\fP(7) -.PP -Dieses Programm ist Teil von live\-helper. - -.SH HOMEPAGE -Weitere Informationen über live\-helper und das Debian Live Projekt können -auf der Homepage unter <\fIhttp://live.debian.net/\fP> und im Handbuch -unter <\fIhttp://live.debian.net/manual/\fP> gefunden werden. - -.SH FEHLER -Fehler können durch Einreichen eines Fehlerberichtes für das live\-helper -Paket im Debian Bug Tracking System unter -<\fIhttp://bugs.debian.org/\fP> oder durch Senden einer E\-Mail an die -Debian Live Mailing Liste unter <\fIdebian\-live@lists.debian.org\fP> -(englischsprachig) mitgeteilt werden. - -.SH AUTOR -live\-helper wurde von Daniel Baumann <\fIdaniel@debian.org\fP> für das -Debian Projekt geschrieben. |