diff options
Diffstat (limited to 'templates')
19 files changed, 264 insertions, 52 deletions
diff --git a/templates/casper/parameters.txt b/templates/casper/parameters.txt new file mode 100644 index 0000000..dcc04fc --- /dev/null +++ b/templates/casper/parameters.txt @@ -0,0 +1,49 @@ +Boot Parameters for Debian Live +------------------------------- + +Updated for casper 1.77+debian-7 on 2007-02-08. + +These options (can be combined) work from the syslinux bootprompt: + +casper casper-getty +casper xdebconf +casper hostname=HOSTNAME +casper userfullname=USERFULLNAME +casper username=USERNAME +casper {keyb|kbd-chooser/method}=KEYBOARD +casper {klayout|console-setup/layoutcode}=LAYOUT +casper {kvariant|console-setup/variantcode}=VARIANT , +casper {kmodel|console-setup/modelcode}=CODE , koptions=OPTIONS +casper ip=IFACE,ADDRESS,NETMASK,GATEWAY[:IFACE,ADDRESS,NETMASK,GATEWAY]* +casper ip[=frommedia] +casper {live-media|bootfrom}=DEVICE +casper live-media-offset=BYTES +casper locale=LOCALE | debian-installer/locale=LOCALE +casper netboot[=nfs|cifs] +casper persistent +casper nopersistent +casper showmounts +casper todisk=DEVICE +casper toram +casper {preseed/file|file}=FILE +casper package/question=VALUE + +Values for the vga kernel parameter: + +Colours 640x400 640x480 800x600 1024x768 1152x864 1280x1024 1600x1200 +--------+-------------------------------------------------------------- + 4 bits | ? ? 0x302 ? ? ? ? + 8 bits | 0x300 0x301 0x303 0x305 0x161 0x307 0x31C +15 bits | ? 0x310 0x313 0x316 0x162 0x319 0x31D +16 bits | ? 0x311 0x314 0x317 0x163 0x31A 0x31E +24 bits | ? 0x312 0x315 0x318 ? 0x31B 0x31F +32 bits | ? ? ? ? 0x164 ? + +Colours 640x400 640x480 800x600 1024x768 1152x864 1280x1024 1600x1200 +--------+-------------------------------------------------------------- + 4 bits | ? ? 770 ? ? ? ? + 8 bits | 768 769 771 773 353 775 796 +15 bits | ? 784 787 790 354 793 797 +16 bits | ? 758 788 791 355 794 798 +24 bits | ? 786 789 792 ? 795 799 +32 bits | ? ? ? ? 356 ? diff --git a/templates/syslinux/boot.txt b/templates/syslinux/boot.txt index 2fe3ead..56dffca 100644 --- a/templates/syslinux/boot.txt +++ b/templates/syslinux/boot.txt @@ -1,3 +1,3 @@ splash.rle -Press F1control and F then 1 for help, or ENTER to
\ No newline at end of file +Press F1control and F then 1 for help, or ENTER to diff --git a/templates/syslinux/f1.txt.install b/templates/syslinux/f1.txt.install new file mode 100644 index 0000000..a26234f --- /dev/null +++ b/templates/syslinux/f1.txt.install @@ -0,0 +1,25 @@ + 0fWelcome to Debian GNU/Linux!07 09F107 + +This is a Debian LIVE_DISTRIBUTION combined live and installation LIVE_MEDIA. +It was built on LIVE_DATE. + +0fHELP INDEX07 + +0fKEY TOPIC07 + +<09F107> This page, the help index. +<09F207> Prerequisites for installing Debian. +<09F307> Boot methods for special ways of using this LIVE_MEDIA +<09F407> Additional boot methods; rescue mode. +<09F507> Special boot parameters, overview. +<09F607> Special boot parameters for special machines. +<09F707> Special boot parameters for selected disk controllers. +<09F807> Special boot parameters for the install system. +<09F907> How to get help. +<09F1007> Copyrights and warranties. + +For F1-F9 type control and F then the digit 1-9 +For F10 type control and F then the digit 0 + + +Press F2 through F10 for details, or ENTER to diff --git a/templates/syslinux/f1.txt b/templates/syslinux/f1.txt.live index 2e8656c..5a6aecf 100644 --- a/templates/syslinux/f1.txt +++ b/templates/syslinux/f1.txt.live @@ -1,6 +1,6 @@ 0fWelcome to Debian GNU/Linux!07 09F107 -This is a Debian Live CD-ROM. +This is a Debian LIVE_DISTRIBUTION live LIVE_MEDIA. It was built on LIVE_DATE. 0fHELP INDEX07 @@ -9,8 +9,8 @@ It was built on LIVE_DATE. <09F107> This page, the help index. <09F207> Prerequisites for installing Debian. -<09F307> Boot methods for special ways of using this CD-ROM -<09F407> Additional boot methods; live and rescue modes. +<09F307> Boot methods for special ways of using this LIVE_MEDIA +<09F407> Additional boot methods. <09F507> Special boot parameters, overview. <09F607> Special boot parameters for special machines. <09F707> Special boot parameters for selected disk controllers. diff --git a/templates/syslinux/f2.txt b/templates/syslinux/f2.txt.install index 60243d3..12c0b22 100644 --- a/templates/syslinux/f2.txt +++ b/templates/syslinux/f2.txt.install @@ -1,6 +1,12 @@ - 0fPREREQUISITES FOR INSTALLING DEBIAN07 09F207 + 0fPREREQUISITES FOR USING DEBIAN07 09F207 -You must have at least 32 megabytes of RAM to use this Debian installer. +You must have at least 64 megabytes of RAM to run this Debian Live system. + +See the Live Manual or the FAQ for more information; both +documents are available at the Debian Live web site, 0fhttp://debian-live.alioth.debian.org/07 + + +You must have at least 32 megabytes of RAM to use the Debian installer. You should have space on your hard disk to create a new disk partition of at least 256 megabytes to install the base system. You'll need more @@ -14,10 +20,4 @@ Thank you for choosing Debian! - - - - - - -Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f2.txt.live b/templates/syslinux/f2.txt.live new file mode 100644 index 0000000..f79062a --- /dev/null +++ b/templates/syslinux/f2.txt.live @@ -0,0 +1,23 @@ + 0fPREREQUISITES FOR RUNNING DEBIAN07 09F207 + +You must have at least 64 megabytes of RAM to run this Debian Live system. + +See the Live Manual or the FAQ for more information; both +documents are available at the Debian Live web site, 0fhttp://debian-live.alioth.debian.org/07 + +Thank you for choosing Debian! + + + + + + + + + + + + + + +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f3.txt b/templates/syslinux/f3.txt.install index 5f3996f..db59717 100644 --- a/templates/syslinux/f3.txt +++ b/templates/syslinux/f3.txt.install @@ -1,23 +1,23 @@ 0fBOOT METHODS07 09F307 - 0fAvailable boot methods:07 +0flive07 + Start the live system -- this is the default LIVE_MEDIA method. +0flive-failsafe07 + Start the live system in fail-safe mode. 0finstall07 Start the installation. -0finstallgui07 - Start the installation using the graphical installer. 0fexpert07 Start the installation in expert mode, for maximum control. -0fexpertgui07 - Start the installation in expert mode using the graphical installer. To use one of these boot methods, type it at the prompt, optionally followed by any boot parameters. For example: - boot: install acpi=off If unsure, you should use the default boot method, with no special parameters, by simply pressing enter at the boot prompt. +Except in expert mode, non-critical kernel boot messages are suppressed. + Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f3.txt.install.g-i b/templates/syslinux/f3.txt.install.g-i new file mode 100644 index 0000000..445ddbd --- /dev/null +++ b/templates/syslinux/f3.txt.install.g-i @@ -0,0 +1,23 @@ + 0fBOOT METHODS07 09F307 + +0fAvailable boot methods:07 + +0flive07 + Start the live system -- this is the default LIVE_MEDIA method. +0flive-failsafe07 + Start the live system in fail-safe mode. +0finstall07 or 0finstallgui07 + Start the installation using the normal or graphical installer. +0fexpert07 and 0fexpertgui07 + Start the installation in expert mode, for maximum control. + +To use one of these boot methods, type it at the prompt, optionally +followed by any boot parameters. For example: + boot: install acpi=off + +If unsure, you should use the default boot method, with no special +parameters, by simply pressing enter at the boot prompt. + +Except in expert mode, non-critical kernel boot messages are suppressed. + +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f3.txt.live b/templates/syslinux/f3.txt.live new file mode 100644 index 0000000..397c649 --- /dev/null +++ b/templates/syslinux/f3.txt.live @@ -0,0 +1,23 @@ + 0fBOOT METHODS07 09F307 + +0fAvailable boot methods:07 + +0flive07 + Start the live system -- this is the default LIVE_MEDIA method. +0flive-failsafe07 + Start the live system in fail-safe mode. + + + + + + + +To use one of these boot methods, type it at the prompt, optionally +followed by any boot parameters. For example: + boot: live acpi=off + +If unsure, you should use the default boot method, with no special +parameters, by simply pressing enter at the boot prompt. + +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f4.txt.install b/templates/syslinux/f4.txt.install new file mode 100644 index 0000000..106c30e --- /dev/null +++ b/templates/syslinux/f4.txt.install @@ -0,0 +1,23 @@ + 0fRESCUE MODE07 09F407 + +0fUse one of these boot methods to rescue an existing install07 + +0frescue07 + Boot into rescue mode. + +0fmemtest07 + Start memtest to scan your RAM for errors. +0ffloppy07, 0fdisk107 or 0fdisk207 + Boot from the floppy, first or second hard disk. + + + +To use one of these boot methods, type it at the prompt, optionally +followed by any boot parameters. For example: + + boot: rescue acpi=off + + + + +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f4.txt b/templates/syslinux/f4.txt.install.g-i index 1167738..db29ea6 100644 --- a/templates/syslinux/f4.txt +++ b/templates/syslinux/f4.txt.install.g-i @@ -1,12 +1,4 @@ - 0fLIVE AND RESCUE MODES07 09F407 - - -0fUse one of these boot methods to start the live system07 - -0flive07 - Start the live system in standard mode -- this is the default. -0flive-failsafe07 - Start the live system in failsafe mode. + 0fRESCUE MODE07 09F407 0fUse one of these boot methods to rescue an existing install07 @@ -16,8 +8,16 @@ Boot into rescue mode using the graphical installer. 0fmemtest07 - Run memtest86+ (memory tester). + Start memtest to scan your RAM for errors. 0ffloppy07, 0fdisk107 or 0fdisk207 Boot from the floppy, first or second hard disk. +To use one of these boot methods, type it at the prompt, optionally +followed by any boot parameters. For example: + + boot: rescue acpi=off + + + + Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f4.txt.live b/templates/syslinux/f4.txt.live new file mode 100644 index 0000000..6a76aca --- /dev/null +++ b/templates/syslinux/f4.txt.live @@ -0,0 +1,23 @@ + 0fADDITIONAL BOOT METHODS07 09F307 + +0fAvailable boot methods:07 + +0fmemtest07 + Start memtest to scan your RAM for errors. +0ffloppy07, 0fdisk107 or 0fdisk207 + Boot from the floppy, first or second hard disk. + + + + + + + + + + + + + + +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f5.txt b/templates/syslinux/f5.txt index 6e73913..58bbb94 100644 --- a/templates/syslinux/f5.txt +++ b/templates/syslinux/f5.txt @@ -20,4 +20,4 @@ module.param=value, for example: libata.atapi_enabled=1 -Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f6.txt b/templates/syslinux/f6.txt index 4bdb09a..772fd50 100644 --- a/templates/syslinux/f6.txt +++ b/templates/syslinux/f6.txt @@ -7,17 +7,17 @@ If you use hex numbers you have to use the 0x prefix (e.g., 0x300). HARDWARE PARAMETER TO SPECIFY07 IBM PS/1 or ValuePoint (IDE disk) 0fhd=0bcylinders0f,0bheads0f,0bsectors07 Some IBM ThinkPads 0ffloppy.floppy=thinkpad07 -IBM Pentium Microchannel 0fmca-pentium no-hlt07 Protect I/O port regions 0freserve=0biobase0f,0bextent07[0f,0b...07] -Workaround faulty FPU (old machines) 0fno38707 Laptops with screen display problems 0fvga=77107 Use first serial port at 9600 baud 0fconsole=ttyS0,9600n807 Force use of generic IDE driver 0fgeneric.all_generic_ide=107 -If you experience lockups or other hardware failures, +Possible (temporary) workarounds for lockups or other hardware failures: disable buggy APIC interrupt routing 0fnoapic nolapic07 +(partly) disable ACPI 0facpi=noirq07 or 0facpi=off07 +disable USB 0fnousb07 For example: boot: install vga=771 noapic nolapic -Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file +Press F1control and F then 1 for the help index, or ENTER to diff --git a/templates/syslinux/f7.txt b/templates/syslinux/f7.txt index 48f76c9..cd7ca7e 100644 --- a/templates/syslinux/f7.txt +++ b/templates/syslinux/f7.txt @@ -16,8 +16,8 @@ for more. -For example: +For example: boot: install aic7xxx.aic7xxx=no_probe -Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file +Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT} diff --git a/templates/syslinux/f8.txt b/templates/syslinux/f8.txt index 04341b6..bc40696 100644 --- a/templates/syslinux/f8.txt +++ b/templates/syslinux/f8.txt @@ -1,6 +1,6 @@ 0fSPECIAL BOOT PARAMETERS - INSTALLATION SYSTEM07 09F807 -You can use the following boot parameters at the 0fboot:07 prompt, +You can use the following boot parameters at the 0fboot:07 prompt, in combination with the boot method (see <09F307>). These parameters control how the installer works. 0f @@ -8,7 +8,6 @@ RESULT PARAMETER07 Verbose debugging 0fDEBCONF_DEBUG=507 Debug boot sequence 0fBOOT_DEBUG=2|307 Disable framebuffer 0ffb=false07 -Don't probe for USB 0fdebian-installer/probe/usb=false07 Don't start PCMCIA 0fhw-detect/start_pcmcia=false07 Force static network config 0fnetcfg/disable_dhcp=true07 Set keyboard map 0fbootkbd=es07 @@ -16,8 +15,9 @@ Use Braille tty 0fbrltty=driver,device,texttable07 Use high contrast accessibility theme 0ftheme=dark07 Use special tasks 0ftasks="kde-desktop, standard"07 -For example: + +For example: boot: install fb=false -Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file +Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT} diff --git a/templates/syslinux/f9.txt b/templates/syslinux/f9.txt.install index b0cac8d..b6acea6 100644 --- a/templates/syslinux/f9.txt +++ b/templates/syslinux/f9.txt.install @@ -11,13 +11,13 @@ experience! See the Installation Manual or the FAQ for more information; both documents are available at the Debian web site, 0fhttp://www.debian.org/07 +If you can't run the Debian Live system, see the Installation Manual or +the FAQ for more information; both documents are available at +the Debian web site, 0fhttp://debian-live.alioth.debian.org/07 - - - -Press F1control and F then 1 for the help index, or ENTER to
\ No newline at end of file +Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT} diff --git a/templates/syslinux/f9.txt.live b/templates/syslinux/f9.txt.live new file mode 100644 index 0000000..f39ec37 --- /dev/null +++ b/templates/syslinux/f9.txt.live @@ -0,0 +1,23 @@ + 0fGETTING HELP07 09F907 + +If you can't run Debian, don't despair! The Debian team is ready to +help you! We are especially interested in hearing about boot +problems, because in general they don't happen to only 0fone07 person. +We've either already heard about your particular problem and can dispense a +quick fix, or we would like to hear about it and work through it with you, +and the next user who comes up with the same problem will profit from your +experience! + +See the Live Manual or the FAQ for more information; both +documents are available at the Debian web site, +0fhttp://debian-live.alioth.debian.org/07 + + + + + + + + + +Press F1control and F then 1 for the help index, or ENTER to ${BOOTPROMPT} diff --git a/templates/syslinux/syslinux.cfg b/templates/syslinux/syslinux.cfg index 733a5eb..48599ed 100644 --- a/templates/syslinux/syslinux.cfg +++ b/templates/syslinux/syslinux.cfg @@ -20,17 +20,17 @@ LINUX_INSTALL MEMTEST -#LABEL floppy -# localboot 0x00 +LABEL floppy + localboot 0x00 -#LABEL disk1 -# localboot 0x80 +LABEL disk1 + localboot 0x80 -#LABEL disk2 -# localboot 0x81 +LABEL disk2 + localboot 0x81 -#LABEL nextboot -# localboot -1 +LABEL nextboot + localboot -1 PROMPT 1 TIMEOUT 0 |