path: root/backend/modules/hdmap

#!/bin/bash

# Synopsis: mointpoint_demands
#
# This function dumps the demands of various mountpoints
function mointpoint_demands()
{
cat <<"EOT"
/: Type:Linux
/boot: LVM:no Type:Linux
/bin: Type:Linux
/etc: Type:Linux
/home: Type:Linux
/lib: Type:Linux
/opt: Type:Linux
/root: Type:Linux
/sbin: Type:Linux
/tmp: Type:Linux
/usr: Type:Linux
/var: Type:Linux
EOT
}

# Synopsis: is_disk /dev/xyz
#
# This function returns 0 if the supplied argument is a disk.
function is_disk()
{
    stat --format "%t %G" "$1" | grep -qe "^3 " -e " disk$" && return 0
    return 1
}

# Synopsis: handle_mountpoint_demands <device>
#
# This function handles the demands of the mountpoints (data from function mountpoint_demands)
#   * check if filesystem matches (Filesystem:reiserfs / Filesystem:ext3 / see get_filesystem() )
#   * check if filesystem-type matches (Type:Linux / Type:Windows / see get_filesystem_type() )
#   * check if <device> is a LVM-device (LVM:yes / LVM:no)
# TODO: from old installer, not adapted yet.
function handle_mountpoint_demands()
{
	PART="$1";
	FORMAT_FS="$2";
	POINT=$(echo $3 | cut -d":" -f1); shift 3
	while [ "$1" ];
	do
		VAR=$(echo $1 | cut -d":" -f1)
		VAL=$(echo $1 | cut -d":" -f2)
		case "$VAR" in
		Filesystem)
			if [ -n "$FORMAT_FS" -a "$FORMAT_FS" != "$VAL" ]; then
				echo "ERROR: Filesystem on $PART ($POINT) has to be formatted with $VAL!" \
				| send_error 1
				return 1
			elif [ -z "$FORMAT_FS" -a "$(get_filesystem "$PART")" != "$VAL" ]; then
				echo "ERROR: Filesystem on $PART ($POINT) is not $VAL!" \
				| send_error 1
				return 1
			fi
			;;
		Type)
			if [ -n "$FORMAT_FS" -a "$(get_filesystem_type -fs "$FORMAT_FS")" != "$VAL" ]; then
				echo "ERROR: Filesystem on $PART ($POINT) has to be formatted with a $VAL-Filesystem!" \
				| send_error 1
				return 1
			elif [ -z "$FORMAT_FS" -a "$(get_filesystem_type "$PART")" != "$VAL" ]; then
				echo "ERROR: Filesystem on $PART ($POINT) is not a $VAL-Filesystem!" \
				| send_error 1
				return 1
			fi
			;;
		LVM)
			not=not
			lvdisplay $PART &>/dev/null; A=$?
			[ "$VAL" = "yes" ] && unset not; B=$?
			((A*B)) || ! ((A-B)) || ( echo ERROR: $PART "($POINT)" must $not be on a LVM-device! | send_error 1; return 1 ) || return 1
			;;
		esac
		shift
	done
}

# Synopsis: check_partitions_for_install
#
# This function processes the hd_map-config:
#   * make sure that the device exists
#   * take care of the mountpoint demands
#   * check if partition has the "automount"-flag
#   * check if all partitions are big enough to install the system on it
# TODO: from old installer, not adapted yet.
function check_partitions_for_install()
{
	unset found_root
	local progress_steps=$(( $(wc -l <<<"$cfg_hdmap") * 2 + 1))
	local progress=0
        # compute partition_min_table
        local partition_min_table_=$ESTIMATED_ROOT_MIN
        while IFS=: read device mountpoint filesystem automount
        do
            progress=$[progress+1]; emit_progress $[100*progress/progress_steps]
            case "$mountpoint" in
            "") continue;;
            /) continue;;
            /usr) MP_MIN=$(( $ESTIMATED_ROOT_MIN - $(du -sm --exclude /live/filesystem/usr /live/filesystem | cut -f1) ));;
            *) MP_MIN=$(du -sm "/live/filesystem$mountpoint" 2>/dev/null | cut -f1);;
            esac
            [ -z "$MP_MIN" ] && MP_MIN=0
            mp="$mountpoint"
            while mp="$(dirname "$mp")"
            do
                var_mp="$(echo "$mp" | sed 's/[^a-zA-Z0-9]/_/g')"
                parent_min="$(eval echo \$partition_min_table$var_mp)"
                if [ -n "$parent_min" ]; then
                    eval local partition_min_table$var_mp=$(( $parent_min-$MP_MIN ))
                    break
                fi
                [ "${#mp}" -gt 1 ] || break;
            done
            var_mp="$(echo "$mountpoint" | sed 's/[^a-zA-Z0-9]/_/g')"
            eval local partition_min_table$var_mp=$MP_MIN
        done <<<"$cfg_hdmap"

        progress=$[progress+1]; emit_progress $[100*progress/progress_steps]
        isosrc_dev="$(awk '{if($2 == "/isosrc"){print $1}}' /proc/mounts)"
	while IFS=: read device mountpoint filesystem automount
	do
		if [ -z "$mountpoint" ]; then
                        # update progress
                        progress=$[progress+1]; emit_progress $[100*progress/progress_steps]
                        continue
                fi
		
		# set flag if there is a root-partition in the hd_map
		[ "$mountpoint" = / ] && found_root=1
		
                if [ "$device" = "$isosrc_dev" ]; then
                    if [ "$filesystem" ]; then
                        send_error 1 "Partition $device ($mountpoint) is mounted to /isosrc... This partition cannot be formatted!"
                        return 1
                    fi
                fi
		
		# take care of the mountpoint demands
		if part_demands="$(mointpoint_demands | egrep "^$mountpoint:" 2>/dev/null)"; then
			[ "$automount" = "auto" ] || send_error 1 "Partition $device ($mountpoint) doesn't have the automount-flag set!" || return 1
			eval handle_mountpoint_demands \"$device\" \"$filesystem\" $part_demands
		fi
		
		# Check if the partition is big enough to contain the installation
		var_mp="$(echo "$mountpoint" | sed 's/[^a-zA-Z0-9]/_/g')"
		mp_min="$(eval echo \$partition_min_table$var_mp)"
		partition_size_min=$[mp_min*1024*1024*115/100] # + 15% Filesystem overhead
		partition_size="$(blockdev --getsize64 $device)" # actual size of device (in bytes)
		if [ "$partition_size" -lt "$partition_size_min" ]; then
			send_error 1 "Partition $device ($mountpoint) is too small! it is $[partition_size/1024/1024] MB big, but it should be at least $[partition_size_min/1024/1024+10] MB big"
			return 1
		fi
		progress=$[progress+1]; emit_progress $[100*progress/progress_steps]
	done <<<"$cfg_hdmap"
	
	if [ -z "$found_root" ]; then
		send_error 1 "No root-partition selected!"
	fi
}

# Synopsis: umount_all_affected [-fdisk] <device>
#
# This function unlocks a device and all affected devices:
#   * it umounts mounted partitions with "umount" and disables swap-partitions with "swapoff"
#   * if "-fdisk" is set:
#     - it unlocks all partitions that are on the same device as the one given
#       (e.g. "umount_all_affected -fdisk /dev/hda3" is called, so /dev/hda* is unlocked)
#     - it takes care of LVM-Volumes and unlocks them if they are affected
#     - it takes care of dm_crypt-Disks and unlocks them if they are affected
# TODO: from old installer, not fully adapted yet.
function umount_all_affected()
{
	unset DEV NR EXHAUSITIVE
	if [ "$1" = "-fdisk" ]; then
		# partition itself and its "sister" partitions (just to be sure, for fdisk):
		shift
		#DEV="${1%%[0-9]*}"
		DEV="$(get_disk "$1")"
		NR="${1:${#disk}}"
		EXHAUSITIVE=1
	fi
	[ -z "$DEV" ] && DEV="$(echo "$1" | dereferce_links_in_list)"
	# Mounts
	while IFS=" " read mnt_dev mnt_point mnt_dummy
	do
		[ "$mnt_point" = "/live/filesystem" -o -z "$mnt_point" ] && continue
		case "$mnt_point" in
		/|/cdrom|/dev|/dev/*|/isosrc|/proc|/proc/*|/ramdisk|/sys|/tmp) ;;
		*)
			echo $mnt_dev | dereferce_links_in_list | grep -q ^$DEV$ || continue
			for umount_point in $(gawk '{print $2}' /proc/mounts | grep -e "^$mnt_point$" -e "^$mnt_point/" | sort -r)
			do
				fuser -km "$umount_point"
				umount "$umount_point" &>/dev/null || \
				umount -l "$umount_point"
			done
			;;
		esac
	done < /proc/mounts
	# Swap
	for i in $(grep -e "^$DEV" /proc/swaps  | cut -d\  -f1)
	do
		swapoff "$i";
	done
#	# LVM
#	for i in $(pvdisplay -c 2>/dev/null | grep "$DEV" | cut -d: -f2 | sort | uniq)
#	do
#		lv_name="$(lvdisplay $i | gawk '/LV Name/{print $3}')"
#		lv_dev="$(echo $lv_name | dereferce_links_in_list)"
#		for dev in $( ( echo $lv_name; echo $lv_dev ) | sort | uniq)
#		do
#			# recursive function call
#			umount_all_affected $dev
#		done
#		((EXHAUSITIVE)) && vgchange -a n $i &>/dev/null
#	done
#	# Crypttab
#	for cmapname in $(grep $DEV /etc/crypttab | cut -d\  -f1)
#	do
#		umount_all_affected "/dev/mapper/$cmapname"
#		((EXHAUSITIVE)) && cryptsetup remove $cmapname
#	done
}

# Synopsis: prepare_partitions_for_install [--nomount]
#
# This function processes the hd_map-config:
#   * create mountpoints
#   * format the partitions if a filesystem is given
#   * take care of LVM-Volumes and dm_crypt-Disks
#   * create the specified mountpoints in $TARGET
#   * mount the partitions to the target
#   * mount (bind) /dev, /proc and /sys to the target
#
# --nomount simply doesn't mount or umount partitions
# TODO: from old installer, not adapted yet.
function prepare_partitions_for_install()
{
	send install_step prepare_partitions_for_install
	emit_progress 0
        local progress_steps=$(( $(wc -l <<<"$cfg_hdmap") ))
	local progress=0
	while IFS=: read device mountpoint filesystem automount
	do	
                [ -z "$mountpoint" ] && continue

		[ "$1" != "--nomount" ] && umount_all_affected $device
		
		# format device with filesystem (if specified)
		if [ "$filesystem" ]; then
			
			dd if=/dev/zero of=$device bs=1k count=16 >/dev/null 2>/dev/null # shutup! :-)
			
			TMP=/tmp/mkfs.$$
			case "$filesystem" in
			xfs)
				mkfs.$filesystem -f $device 2> $TMP 1>&2
				;;
			reiser*)
				echo y | mkfs.$filesystem $device 2> $TMP 1>&2
				;;
			jfs)
				echo y | mkfs.$filesystem $device 2> $TMP 1>&2
				;;
			*)
				mkfs.$filesystem $device 2> $TMP 1>&2
				;;
			esac

			RC="$?"
			if [ $RC -ne 0 ]; then
				ERROR_MESSAGES=$(tail -8 $TMP)
				echo "$ERROR_MESSAGES"
				send_error 1 "mkfs failed" || return 1
			fi
	
			# Deactivate dir_index-feature of ext2/ext3/ext4-partitions
			case $filesystem in
				*ext*)
					tune2fs -O ^dir_index $device &>/dev/null
					;;
			esac
		fi
		
		mkdir -p ${TARGET}${mountpoint} # make sure mountpoint exists
		
		# only mount the partition if: 1. it has the automount flag
		#                              2. the mountpoint exists on the Live system
		#                          and 3. prepare_partitions_for_install was not called with "--nomount"
		if [ "$automount" = "auto" -a "$1" != "--nomount" -a -d "/live/filesystem$mountpoint" ]; then
			# mount device to mountpoint
			EC="$(LC_ALL=C mount $device ${TARGET}${mountpoint} 2>&1)"
			if (($?)); then
				case "$EC" in
				"*already mounted*") # then let's try "mount --bind"
					already_mp="$(grep ^$device /proc/mounts | cut -d\  -f2)"
					if [ -d "$already_mp" ]; then
						awk '/^\/dev/{if($4 ~ /^rw/){print $1}}' /proc/mounts  | grep -qw $device || mount -o remount,rw "$already_mp"
						mount --bind "$already_mp" ${TARGET}${mountpoint} 2>&1
					fi
					;;
				*)
					send_error 1 "mount failed: $EC" || return 1
					;;
				esac
			fi
			if ! awk '/^\/dev/{if($4 ~ /^rw/){print $1}}' /proc/mounts | grep -qw $device; then
				send_error 1 "mount failed: $EC" || return 1
			fi
		fi
		
		# update progress
		progress=$[progress+1]; emit_progress $[100*progress/progress_steps]
	done < <(sort -t: -k2,2 <<<"$cfg_hdmap")
}

function fill_hdmap()
{
	hdmap_set "$(
        (
                echo "$cfg_hdmap"
		root_disk="$(get_disk "$(hdmap_get device of mountpoint /)")"
                for part in $(list_partitions -usage filesystem)
                do
                        if is_removeable "$part" && [ "$(get_disk "$part")" != "$root_disk" ]; then
                                echo "$part:::"
                        else
                                echo "$part:/media/$(basename "$part")::auto"
                        fi
                done
                for part in $(list_linux_partitions)
                do
                        if is_removeable "$part" && [ "$(get_disk "$part")" != "$root_disk" ]; then
                                echo "$part:::"
                        else
                                echo "$part:/media/$(basename "$part")::auto"
                        fi
                done
                for part in $(list_dm_partitions)
                do
			echo "$part:::"
		done
        ) | sort -u -t: -k1,1)"
}